Bromic Heating

Bromic Eclipse Smart-Heat Freestanding Outdoor Heater

SKU: BH0820001

$5,149.00
  • Heat output 2900W with 33%, 66% and 100% settings

Overview

The Eclipse Smart-Heat Freestanding mounts the Eclipse heater head on a tall arched arm and a weighted base, so a patio gets heat and light without a ceiling to hang from. The matte black head has a radial ceramic screen with a warm white LED ring around its rim.

It plugs in through a 15 foot cable, rolls on two wheels when two people move it and weighs 383 lb complete, which keeps it steady. Bromic lists a dimmer controller and remote with it, and the heater also works with the Bromic Heating app.

What's Included

  • Eclipse Smart-Heat Freestanding heater head with a 15 foot cable and plug
  • Three-section arm and a weighted base with ten 22 lb weights and a base cover
  • Eclipse Dimmer Controller with remote, which Bromic lists as supplied with the heater
  • Bromic instruction manual

Bromic film of the Eclipse Smart-Heat Freestanding heater.

Features

An arched arm instead of a ceiling

A swan-neck arm lifts the head over the seating from a base on the ground. There is nothing to fix overhead, so it suits terraces, courtyards and rooftops where a ceiling or pergola is missing or too high.

Curved Eclipse Freestanding arms carrying heater heads above lounge seating under a pergola

Weighted base with wheels

Ten 22 lb weights sit in the base, bringing the whole heater to 383 lb. Two people can tilt it forward onto its two front wheels, roll it to a new spot and pivot it there, with the weights left in place. In winds above 20 mph, bolt the base down or put the heater away.

Eclipse Freestanding heater arching over a living area that opens onto a patio

Heat and light you can dim

Heat comes in three steps, 33%, 66% and 100% of 2900W. The LED ring gives 216.6 lumens of warm white light at 3000K, adjustable from 50% to 100% and then in 1% steps on the remote.

Guests on a rooftop terrace beneath curved Eclipse Freestanding heater arms

About 121 square feet of warmth

One heater covers roughly 121 square feet. Bromic lists a minimum floor clearance of 79 inches and asks for 3.3 feet of open space in front of the head, with heat-sensitive furniture kept at least that far away.

Phone, voice or remote

The heater is app-enabled, so heat and light can be set from the Bromic Heating app once it is connected, with scheduling and zones over Wi-Fi. The manual also explains how to link it to Amazon Alexa and Google Home for voice control, and Bromic supplies a remote for adjusting it from your seat.

Specifications

Brand
Bromic Heating
Series
Eclipse Smart-Heat Freestanding
Fuel type
Electric
Heat output
2900W with 33%, 66% and 100% settings
Heat area
About 121 sq ft
Voltage
220-240V, 60Hz
Rated current
11.4A at 220V, 11.8A at 230V or 12.1A at 240V
Light
Dimmable warm white LED, 3000K, 216.6 lumens (20W at 24V DC)
Heater head
About 27.5 in across and 4.4 in deep; 30 lb
Weight
383 lb complete: head 30 lb, arm 33 lb, base 320 lb with ten 22 lb weights
Color
Matte black
Cable and plug
15 ft cord with a NEMA 6-20P plug, for a 220-240V 20A NEMA 6-20R outlet
Minimum floor clearance
79 in
Standing surface
Flat, firm surface rated for at least 350 lb
Wind
Designed for winds up to 20 mph; fix the base to the ground or store the heater away above that
Water protection
IP54
Controls
Eclipse Dimmer Controller with remote, and the Bromic Heating app
Certification
SGS / NA SGSNA/21/GZ/00074
Warranty
3 years from Bromic Heating for the original owner

Eclipse Smart-Heat Freestanding heater head dimension drawing with face and side views

Heat bloom diagram showing the warmed area around an Eclipse Smart-Heat Freestanding heater

Front and side clearance drawing for the Eclipse Smart-Heat Freestanding heater

FAQ

Does it plug in?

Yes. The 15 foot cord ends in a NEMA 6-20P plug, so it needs a grounded 220-240V, 20A outlet of the NEMA 6-20R type, and Bromic offers no adapter. The manual still requires installation by a licensed electrical contractor and asks for IP54-rated outdoor outlets so the heater keeps its water rating.

Can I move it once it is set up?

Yes, with two people. Unplug it, keep all ten weights in the base and tilt it forward onto the two front wheels to roll it. Protect the floor first, and never roll it over the power cable.

What does it stand on?

A flat, firm surface that can carry at least 350 lb. Grass, mud and dirt are not suitable.

Can it stay out in the rain?

The heater is rated IP54, but Bromic advises placing it under cover. When it is not in use, unplug it and store it away from sun and rain.

How is it delivered?

It arrives in three boxes. The base crate weighs more than 330 lb, and Bromic's manual calls for a forklift to move it before it is opened. Two people are needed to put the arm and head together.

What do I need to run it from my phone?

A phone or tablet with Bluetooth 4.2 and Android 8.1 or iOS 14.3 or newer, the Bromic Heating app and an email address for the account. For Wi-Fi control you also need a 2.4GHz network.

You may also like

Bromic Heating
From $3,645.00

Bromic Platinum Smart-Heat Electric Marine Outdoor Heater

In stock
Fire by Design
From $3,538.41

Fire by Design Vessel Fire and Water Bowl

In stock
Fire by Design
From $3,537.67

Fire by Design Aspen Gas Fire Table

In stock
Fire by Design
From $3,504.42

Fire by Design Aura Gas Fire Table

In stock